I found more, this looks very close to what I have in my 3000 Exp:
https://www.cpperformance.com/products/ ... -lifts.htm
Welcome to Pursuit Boats Owners Forum
We are a boating forum for owners of Pursuit Boats to enthusiastically discuss all aspects of Pursuit Boat ownership. Whether you are looking for your first Pursuit or currently own one, you are sure to feel at home on PursuitBoatOwners.com
You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
Search found 78 matches
- Wed May 02, 2018 9:54 pm
- Jump to forum
- Jump to topic
Powder Coating T Top and Bow Rail
Hello David. I had a small aluminum mast powder coated a couple of months ago. To get those items powder coated you have to take them off the boat. I am not sure if stainless can be powder coated but either way those items would also need to fit inside the oven to be heated up. The way it works in c...
- Fri May 04, 2018 9:53 pm
- Jump to forum
- Jump to topic
FLIR M232
I finally got out to the boat today. Pulled off the shrink wrap, installed the canvas after getting new zippers put in over the winter and installed the modified mast / FLIR mount. I used pieces of the mast to make backing plates as it is now heavier. Next week it's time to install the batteries, ge...
- Mon Jul 09, 2018 10:01 pm
- Jump to forum
- Jump to topic
Exhaust Elbow
I forgot, this is the drill guide screwed to a piece of timber tech decking, bolted to the turbo.
- Mon Jul 09, 2018 9:57 pm
- Jump to forum
- Jump to topic
Exhaust Elbow
This spring I had test run my engines on land like I always do and noticed a broken bolt on the starboard turbo/elbow connection. I had to invent a tool that would let me drill out the bolt in the center for an easy out. I used a drill guide from a dowling jig to center the bit, and luckily it worke...
- Wed Jul 11, 2018 8:36 pm
- Jump to forum
- Jump to topic
Exhaust Elbow
Back out on the water! I put it all together yesterday, and took a short run. Took her out this evening and anchored for dinner. It's all good! Halfway through summer, but now that my wife and I are retired we can run much later into the fall. getting used to the FLIR also.
- Wed Jul 18, 2018 10:13 am
- Jump to forum
- Jump to topic
New Member
Congratulations on the new purchase. I have not had any problems with my fuel tanks, but I am crazy about keeping my bilges dry. A problem that has come up on other inboard powered Pursuits is rot by the air intakes on the side of the hull. This is an area that a surveyor needs to hit with a moistur...
- Sat Oct 06, 2018 8:58 am
- Jump to forum
- Jump to topic
250 original forward cushion covers HELP ME!!
Hello Carlo, have you thought of having them made locally? The best I can do is give you contact information for Pursuit.
http://www.pursuitboats.com/OWNERS.php
Good luck, Mark
http://www.pursuitboats.com/OWNERS.php
Good luck, Mark
- Sun Oct 28, 2018 9:23 pm
- Jump to forum
- Jump to topic
October Surprise!
This summer I found a soft spot on the foredeck of our boat, and are having it fixed as I write this. The surprise was how big the "soft spot" was. Another surprise is how Pursuit built the boat. Under the skin of the deck a large area of coring was bad. But what really got me was how the ...
- Sat Nov 03, 2018 10:14 pm
- Jump to forum
- Jump to topic
October Surprise!
Well the damage went down the port side deck some also, so that came off yesterday. I'll keep you posted!
Sponsors