Could anyone tell me the bunk spacing for this hull as I
am interested in putting it on a lift. I have tried pursuit. There out for a week and our local pursuit dealer does not have an idea. Our dock builder is not returning phone calls.
Thanks,
Cory
Welcome to Pursuit Boats Owners Forum
We are a boating forum for owners of Pursuit Boats to enthusiastically discuss all aspects of Pursuit Boat ownership. Whether you are looking for your first Pursuit or currently own one, you are sure to feel at home on PursuitBoatOwners.com
You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
2004 pursuit 3100 offshore with crusader engines.
-
36yellowfin
Topic author - Junior Member
- Posts: 3
- Joined: Wed Jan 15, 2025 3:31 pm
- Vessel Info: 2004 pursuit 3100 with crusader engines
-
tczx3
- Junior Member
- Posts: 2
- Joined: Wed Feb 17, 2021 8:03 pm
- Home Port: Michigan
- Vessel Info: 2003 3000 Express
1997 2860 Denali
2004 pursuit 3100 offshore with crusader engines.
Do you have the Owners Manual for the boat? Pursuit included that information in some of their owners manual.
-
36yellowfin
Topic author - Junior Member
- Posts: 3
- Joined: Wed Jan 15, 2025 3:31 pm
- Vessel Info: 2004 pursuit 3100 with crusader engines
2004 pursuit 3100 offshore with crusader engines.
Unfortunately not.
-
Dan1
- Member
- Posts: 79
- Joined: Sun Apr 19, 2020 11:17 pm
- Vessel Info: 3000 Express Cummins 4BTA's
- Been thanked: 25 times
2004 pursuit 3100 offshore with crusader engines.
There's four stringers the engines are mounted to that run the length of the hull aft to forward, align your bunks with these.
For greater stability align them with the outer stringers, or do both. Be aware of water pickups and transducers before you commit to a location.
On your outer hull there should be stickers marked "sling" this represents the best area to support the boat as shown when lifting, the center point being the COG or close to it.
If it where mine I would start the bunk just forward of the forward engine room bulk head and run it just past the aft engine room bulkhead.
For greater stability align them with the outer stringers, or do both. Be aware of water pickups and transducers before you commit to a location.
On your outer hull there should be stickers marked "sling" this represents the best area to support the boat as shown when lifting, the center point being the COG or close to it.
If it where mine I would start the bunk just forward of the forward engine room bulk head and run it just past the aft engine room bulkhead.
Only registered members can view attachments. Registration is fast and FREE!
-
Bigbunnyus
- Junior Member
- Posts: 3
- Joined: Thu Sep 05, 2024 8:01 pm
2004 pursuit 3100 offshore with crusader engines.
The manual is available on the Pursuit site as a PDF. Maybe more important are the schematics, which are not. They have something along the lines of what you are looking for, I think. I scanned all of mine so I could review them when not on the boat (I leave the binder on the boat along with all the component manuals).
You can't attach PDFs to this forum, but I can send them to you via mail if you like. Here is a snapshot of the page you probably want.
You can't attach PDFs to this forum, but I can send them to you via mail if you like. Here is a snapshot of the page you probably want.
Only registered members can view attachments. Registration is fast and FREE!
Return to “General Repairs & Maintenance”
Who is online
Users browsing this forum: No registered users and 8 guests
Sponsors