Welcome to Pursuit Boats Owners Forum

We are a boating forum for owners of Pursuit Boats to enthusiastically discuss all aspects of Pursuit Boat ownership. Whether you are looking for your first Pursuit or currently own one, you are sure to feel at home on PursuitBoatOwners.com

You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Wind shield wiper 1997 2470 WA

Anything related to the operation of your boat that doesn't fit another forum category. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply

Topic author
EdKratt
Junior Member
Posts: 5
Joined: Tue Aug 10, 2021 5:38 am
Vessel Info: 1997 2470 WA
Has thanked: 3 times

Wind shield wiper 1997 2470 WA

Postby EdKratt » Mon Aug 30, 2021 9:03 pm

Are there replacement blades available? How do you get the are off of the spindle? It looks like it is corroded on the shaft.

Thanks, Ed
Top


jet 203
Junior Member
Posts: 14
Joined: Sun May 10, 2015 1:33 pm
Vessel Info: 1999 2460 Denali
Been thanked: 3 times

Wind shield wiper 1997 2470 WA

Postby jet 203 » Tue Sep 07, 2021 1:38 pm

Just did a replacement on my 2460 Denali. Don't make it more difficult than it has to be. The arm does not have to come off. Take the blade off the arm, (I covered it with a rag so as not to scratch the glass. Take the blade to NAPA and have them match it. Cost me $8 or so. Snap the new blade on and you are good to go.
Rich
These users thanked the author jet 203 for the post:
EdKratt (Mon Sep 13, 2021 7:36 am)

Top

Topic author
EdKratt
Junior Member
Posts: 5
Joined: Tue Aug 10, 2021 5:38 am
Vessel Info: 1997 2470 WA
Has thanked: 3 times

Wind shield wiper 1997 2470 WA

Postby EdKratt » Mon Sep 13, 2021 7:37 am

jet 203 wrote:Source of the post Just did a replacement on my 2460 Denali. Don't make it more difficult than it has to be. The arm does not have to come off. Take the blade off the arm, (I covered it with a rag so as not to scratch the glass. Take the blade to NAPA and have them match it. Cost me $8 or so. Snap the new blade on and you are good to go.
Rich

Thanks sounds like a winner to me!
Top
Post Reply

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: No registered users and 2 guests