Welcome to Pursuit Boats Owners Forum
We are a boating forum for owners of Pursuit Boats to enthusiastically discuss all aspects of Pursuit Boat ownership. Whether you are looking for your first Pursuit or currently own one, you are sure to feel at home on PursuitBoatOwners.com
You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
1988 2000 Cuddy repower and transom bracket
-
Topic author - Junior Member
- Posts: 4
- Joined: Sat Jul 06, 2019 8:29 pm
- Vessel Info: 1988 Pursuit 2000 S2 Cuddy
- Has thanked: 1 time
- Been thanked: 4 times
1988 2000 Cuddy repower and transom bracket
So now I am going to rebuild the transom, closing the cutout for the outboard and build a 24 inch bracket on the back for the BF 225 Honda.
-
Topic author - Junior Member
- Posts: 4
- Joined: Sat Jul 06, 2019 8:29 pm
- Vessel Info: 1988 Pursuit 2000 S2 Cuddy
- Has thanked: 1 time
- Been thanked: 4 times
1988 2000 Cuddy repower and transom bracket
-
Topic author - Junior Member
- Posts: 4
- Joined: Sat Jul 06, 2019 8:29 pm
- Vessel Info: 1988 Pursuit 2000 S2 Cuddy
- Has thanked: 1 time
- Been thanked: 4 times
1988 2000 Cuddy repower and transom bracket
-
- Junior Member
- Posts: 4
- Joined: Sat Aug 25, 2018 12:39 pm
- Has thanked: 1 time
- Been thanked: 2 times
1988 2000 Cuddy repower and transom bracket
I recently had the transom replaced on my 2550 CC 1987 and the transom layout and stringers look the same as yours. After i repowered with twin 225 optimax's, I noticed that the transom was flexing. The fiberglass cap over the top shell to the bottom around the top of the transom cracked after hitting a couple of big waves.
The guy that replaced the transom did it from the outside of the boat. Kind of like this post. https://www.thehulltruth.com/boating-bo ... grade.html
I was planning on adding some knee braces to the inside at the motor location and the stringers.
Looking forward to seeing your progress!
-
Topic author - Junior Member
- Posts: 4
- Joined: Sat Jul 06, 2019 8:29 pm
- Vessel Info: 1988 Pursuit 2000 S2 Cuddy
- Has thanked: 1 time
- Been thanked: 4 times
1988 2000 Cuddy repower and transom bracket
- These users thanked the author Mcdo2137 for the post:
- puking dog (Wed Aug 18, 2021 1:21 pm)
Return to “The Project Center”
Who is online
Users browsing this forum: No registered users and 1 guest