Pursuit Boats Owners Forum

Fanukalum

I have a 2018 Pursuit 325OS with power assist steering and a Garmin autopilot. On the dash there is a togle switch to turn the power steering pump off/on. Can someone tell me the purpose of have a switch for the power steering? When would it be advantageous to turn it off? If they went to the troubl...

DiverDux

I am waiting on the weekend to begin repairs(The weather is finally supposed to warm-up.) to the hull of my 3000 Express. I have water getting into the cabin and I suspect that the intrusion is from the area of the side vents. My vents pried off with just the slightest of pressure and encouragement ...

atwr

Can a anyone recommend a good source for O Rings?

I am attempting to replace the O ring on the fresh water wash down 'shower handle' and having no luck finding proper sized O ring.

Thanks

AndyB

I don’t know for sure about pursuits. But from what I’ve seen under the carpet in other boats it is not faired to a nice smooth finish either. May find that if you want a nice gel coated finish that you may also need to do quite a bit of fairing first.

MarkT

It is very easy to do Gus. Posting a picture of the dash might help. Do you have an empty accessory switch? That type of accessory has two wires. Usually a black and red or white. The black wire needs to go to a ground or "negative" side of the battery. Chances are there is a ground bar ne...

bobbruce

Just got home from another after dinner sunset cruise. Flat water,tunes blasting,boat running like a top,alone time etc.etc.etc. Even though the world is upside down and inside out nites like tonite make me appreciate what is good. Thanks for letting me vent.

Woodworker2001

love it man. Glad to hear the old express is treating you well!!!

Fair seas and safe travels man!

Johnny01

hello,
I have a 2470 WA and want to install a garmin radar on the hardtop. Is there a way to snake the wiring down the T-top tubing? Looking for any suggestions or advice!
Thanks,
John

Hookedfishing

Just purchased a 2000 Pursuit 3400, I have located the waste pumpout breaker but I can not fine a switch. With the beaker in the on position the macerator pump does not have power. Also can’t find anything about it in the owners manual.
Any suggestions are welcome,

Thanks

bnc

In my 3000 Express, the macerator pump switch is next to the toilet and waste tank level indicator.

I have also seen them located in the engine room on the aft bulkhead, port side. (again 3000 Express).

Welcome to Pursuit Boats Owners Forum

Search found 10 matches

power assist steering?

3000 Express Side Vent Core Repair

O Rings

2460 Denali Cuddy " remodel"

Add an accessory

Grateful

Grateful

radar installation 2470

Waste pumpout switch location

Waste pumpout switch location