Welcome to Pursuit Boats Owners Forum

We are a boating forum for owners of Pursuit Boats to enthusiastically discuss all aspects of Pursuit Boat ownership. Whether you are looking for your first Pursuit or currently own one, you are sure to feel at home on PursuitBoatOwners.com

You are currently viewing our boards as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

2470 water in bilge

Anything related to the operation of your boat that doesn't fit another forum category. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.

Topic author
Blue Water
Junior Member
Posts: 3
Joined: Thu Jun 09, 2011 10:44 am

2470 water in bilge

Postby Blue Water » Mon Jun 13, 2011 7:38 pm

I have a 2000 WA 2470 and I get water in the bilge when running offshore in chop. Trolling and running in smooth seas, no water. It only gets water in the bilge when fully loaded to fish (four 190lb men, 139 gal. fuel, 125lb ice, etc.). I cannot figure out where the water is coming from. Any thoughts?

Update, still getting water in the forward bilge. Any ideas would be appreciated.


FishinGear
Junior Member
Posts: 5
Joined: Wed Apr 20, 2011 6:46 pm

2470 water in bilge

Postby FishinGear » Tue Jun 28, 2011 9:57 pm

I have a '99 2470 CC that I bought used this past winter. The marine surveyor picked up a cracked thru-hull fitting that I hadn't noticed. It was on the port side just above the waterline, and serviced the fwd fishbox & sink in the head. The crack was radial along the inner-diameter of the fitting just before the transition to the outer flange from about the 3 o'clock position to the 9 o'clock. Although the layout is different for the WA, it may be worth a look for a cracked fitting.

NorthStar
Junior Member
Posts: 17
Joined: Sat May 28, 2011 2:30 pm
Been thanked: 1 time

2470 water in bilge

Postby NorthStar » Wed Jul 13, 2011 11:16 pm

I have a 1995 2470 W/A and had a similar problem. We found that with mine, when water was hitting (choppy seas and loaded down) the starboard side the water was actually coming in the fitting and backing through the bilge pump into the bilge. Since the discharge hose came straight in and down, there was nothing to stop it. I re-routed a new discharge hose to loop way up before it goes down to the bilge pump and the problem seems to be solved. Still getting a little water (a few gallons per long day) but I think my fresh water tank may be leaking.. that next.

Update- That didn't completely solve mine. Still have a few gals in the bilge when I pull the plug. Anybody got any new ideas?

hotpursuit
Junior Member
Posts: 4
Joined: Tue Jun 19, 2012 1:12 pm

2470 water in bilge

Postby hotpursuit » Tue Jun 19, 2012 1:45 pm

did you find the source of the water?

USA591
Junior Member
Posts: 20
Joined: Thu Jan 12, 2012 12:12 am

2470 water in bilge

Postby USA591 » Wed Oct 31, 2012 3:08 pm

I am very interested in following this thread, as I have a Denali 2460 that also has water issues in the bilge--but only when it's being run really hard in chop (i.e., on the way over to Catalina) to the tune of four buckets during a weekend trip.. When I'm harbor cruising and in flat water...no water gets in the bilge.

hnt
Junior Member
Posts: 33
Joined: Mon Dec 20, 2010 4:04 pm

2470 water in bilge

Postby hnt » Tue Nov 06, 2012 4:34 pm

When I was shopping for my 2460. I looked at a boat that had water stains in the cabin on the port side just ahead of the built in cabinet. The owner explained that it was coming in from the joint of the top cap and the hull sides behind the rubrail. The joint must not have been well sealed at the factory or it deteriorated over time. In any case it only happened in heavy seas. You might want to check there.

Henry

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: No registered users and 4 guests